• The low cost Tru Count Air Clutch is placed on each row and is controlled pneumatically from your tractor cab through a GPS or manual controller.

• Since each row has its own clutch, you may divide your planter into as many sections as you wish.
                      Example:  A 12 row planter can be divided into 12, 6, 4, 3, or 2 sections.

• The size of your sections depends strictly on the configuration of your air valves.
                      Examples:  A 12 row planter with 4 air valves = four 3 row sections.                                 
                                          A 16 row planter with 4 air valves = four 4 row sections. 

• The clutches are instantly activated and deactivated with the flip of a switch or a signal from your GPS unit.

• No lag time on stop or startup of clutches.

• Tru Count Air Clutches work equally well on vacuum, air, or mechanical units. On vacuum or air planters, air flow is not affected.

• The Air Clutch System is expandable by adding valves at any time to change the size and number of sections controlled.                       

• Minimal maintenance: just spray 1 shot of silicone spray through the lube port approximately every 100 hours.

• Air Clutches work on all planters, regardless of make or model (except Cyclo).

• Easy installation (about 5-10 minutes per row).

NO PLANTER MODIFICATION REQUIRED!